Blaupunkt ACR 3251 Car Stereo System User Manual


 
ACR 3251 GB
14
6 AF
(Alternative Frequency during RDS
operation)
When “AF” lights up in the display, the
radio will automatically search for a
frequency offering better reception of
the same RDS programme.
To switch AF on/off: Press AF briefly.
Extra functions:
Hold down the button for approximately
2 seconds. REG ON/REG OFF is dis-
played for approximately 2 seconds.
REG ON / REG OFF - With REG ON
the system will only switch to a better
alternative frequency if it offers the
same regional programme (see “REG -
regional programme”).
7 TA (Traffic Announcement = priority for
traffic anouncements)
If “TA” is displayed, the system will play
traffic programme stations only.
TA on/off: Press the TA button.
Extra function:
Coding: Read chapter “Anti-theft pro-
tection” first.
8 1-6
To store and recall stations.
Short instructions
1 On / Off:
Turn the knob.
On
Off
To adjust the volume:
Turn the knob.
2 TONE – audio
To adjust the
BASS
TREBLE (Treble control)
To alter a setting:
Toggle the TONE button until the corre-
sponding abbreviation and the adjusted
value appear in the display.
Use the buttons to alter the selec-
ted setting. The adjusted value is indi-
cated in the display.
The last setting will be stored automati-
cally.
If the setting remains unchanged within
8 seconds, the display will switch back
to the previous condition.
3 Fast winding/Cassette removal
FF: Fast forward; stop by pressing FF.
Cassette removal
Push the button fully.
4 Cassette loading slot
Insert tape (side A or 1 up; the open
side facing to the right).
5 FM·T - FM, Travelstore
Changeover button for switching be-
tween the FM memory banks I, II or “T”
(Travelstore).
To switch between the FM memory
banks:
Toggle button until the desired bank is
indicated in the display.
To automatically store the six most
powerful stations with Travelstore:
To store: Press the FM·T button until
the seek tuning process begins and is
indicated in the display.
To recall: Toggle the FM·T button until
the display shows “T”. Then briefly
press one of the preset buttons 1-6.