Filter
Top Products
12
Radio mode
Switching to radio mode
If you are in cassette mode,
➮ press the FF button 6 until it
goes no further.
The cassette is ejected and the device
switches to radio mode.
Selecting the waveband /
memory bank
This unit can receive programmes
broadcast over the FM frequency range
as well as the MW and LW (AM) rang-
es.
There are three memory banks availa-
ble for the FM range and one for each
of the MW and LW ranges.
Five stations can be stored in each
memory bank.
To switch between the memory banks
or wavebands,
➮ keep pressing the BAND button 3
until the required memory bank or
waveband appears in the display.
Tuning into a station
There are various ways of tuning into a
station.
Automatic seek tuning
➮ Press and hold down the or
button 8 until automatic seek tu-
ning begins.
The unit tunes into the next receivable
station.
Basic functions
Switching on/off
There are various ways of switching the
unit on/off:
Switching on/off using the vehicle
ignition
If the unit is correctly connected to the
vehicle’s ignition and it was not switched
off using button 1, it will switch on/off
simultaneously with the ignition.
Switching on/off using button
11
11
1
➮ To switch the unit on, press button
1.
The unit switches on.
➮ To switch the unit off, press button
1.
The unit switches off.
Adjusting the volume
The volume can be adjusted in stages
from 0 (off) to 50 (maximum).
➮ To increase the volume, turn the
volume control 2 to the right.
➮ To decrease the volume, turn the
volume control 2 to the left.
Adjusting the display
You can switch the colour of the display
illumination between green and amber.
➮ Press the COL button ; to switch
between the colours.
BASIC FUNCTIONS RADIO MODE