Filter
Top Products
13
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
DANSK
Tuning into stations manually
You can also tune into stations manual-
ly.
➮ Briefly press the or button 8.
Storing stations
Storing stations manually
➮ Select the required memory bank,
i.e. FM1, FM2, FMT, or one of the
MW or LW wavebands.
➮ Use the 1-5 button 4 to select the
memory location where you want
to store the station.
➮ Tune into the required station.
➮ Press the 1-5 button 4 for longer
than two seconds.
Storing stations automatically
(Travelstore)
You can automatically store the five sta-
tions with the strongest reception in the
region (only FM). The stations are stored
in the FMT memory bank.
Note:
Any stations that were previously stored
in this memory bank are deleted in the
process.
➮ Press the TS button 7.
The station storing procedure begins.
“TS” appears in the display. Once the
procedure finishes, all the stations
stored in the FMT memory bank are
played briefly.
Listening to stored stations
➮ Select the memory bank or wave-
band.
➮ Repeatedly press the 1-5 station
button 4 until the required memo-
ry location is displayed.
RADIO MODE