Filter
Top Products
10
Radio operation
Switching to the radio mode
If you are currently using the CD player
or CD changer,
➮ press CD•C 8 repeatedly until
“RADIO” appears in the display.
Selecting wavebands/memory
banks
Using this car audio system, you can
tune into radio stations on the FM and
AM wavebands. There are three mem-
ory banks for the FM waveband and one
memory bank for AM. You can store five
stations in each of these memory banks.
Selecting FM
➮ To switch between the FM wave-
bands FM1, FM2 and FMT, press
FM 2.
Selecting AM
➮ To switch between the AM wave-
band, press AM 6.
Tuning into radio stations
You can tune into radio stations in a
number of different ways.
Automatic seek tuning
➮ Press or :.
The radio will tune into the next availa-
ble station within reception range.
Adjusting seek tuning sensitivity
It is also possible to adjust the sensi-
tivity of the seek tuning function. In this
way you can adjust the radio to tune into
stations with strong reception signals
only, or to those with weaker reception
signals as well.
➮ Press MENU <.
➮ Press : repeatedly until
“SENS” appears in the display.
➮ Press :.
The currently selected setting will ap-
pear in the display. “SENS HI” indicates
the highest level of sensitivity, “SENS
LO” the lowest. If you select “SENS LO”,
lo will light up in the display.
➮ Press : to adjust the desired
sensitivity.
➮ Once you have made your selec-
tion, press MENU <.
Manual station tuning
You can also tune into radio stations
manually.
➮ Press or :.
Storing radio stations
Storing radio stations manually
➮ Select the desired FM memory
bank FM1, FM2, FMT or the AM
waveband.
➮ Tune into the radio station you
would like to store.
RADIO OPERATION