Blaupunkt CD31 Car Stereo System User Manual


 
11
FRANÇAIS
ENGLISH
ESPAÑOL
PORTUGUÊS
Saving a Station Automatically
(Travelstore)
You can also save the five strongest sta-
tions in the area automatically. This is
done in the FMT or AM memory level,
depending on your chosen waveband.
Note:
Any stations previously saved on
this level will be deleted.
Briefly press the TS button 3.
Storing starts. “T-STORE” appears in the
display. When the procedure is com-
plete, the station in memory location 1
of the memory level in question is
played.
Going to a Preset Station
Select the memory level where the
station is stored.
Press the corresponding button 1-5
;.
Scanning through Available
Stations (SCAN)
You can listen to short samples from all
the stations that can currently be re-
ceived. The length of the samples can
be set, in the menu, to between 5 and
30 seconds.
Starting SCAN
Hold down the SCAN button 4.
The scanning process starts. “SCAN”
appears briefly in the display, after which
the current frequency is displayed, flash-
ing.
Stop SCAN, continue listening to a
station
Press the SCAN button 4 again.
The scanning process is stopped, and
the last set station remains active.
Setting Scan Time
Press the MENU button :.
Press the or button 9 until
“SCANTIME” appears in the dis-
play.
Set the desired sampling time with
the buttons 9.
When the setting process is com-
plete, press the MENU button :.
Note:
The chosen sampling time also ap-
plies to CD and CD-changer scans.
Regional Tuner Settings
This device is fitted with a multiband
tuner which can be adjusted to specific
regional requirements. The regions
which can be set are: America, Europe,
Asia and Thailand. The radio only of-
fers full functionality in other countries if
it is set to the region in question.
Changing Tuner Setting
Press the MENU button :.
Press the or button 9 until
“FM TUNER” appears in the dis-
play.
Set the region with the buttons
9.
RADIO OPERATION