Filter
Top Products
10
Radio Operation
Switching on Radio Operation
If the current operating mode is CD, CD-
changer or AUX (only for Santa Fe
CD31)
➮ Press the BAND button 2.
or
➮ Press the CD•C button 7 until
“RADIO” appears in the display.
Select Waveband/Memory Level
This radio receives stations in the VHF
(FM) waveband as well as MW and LW
(AM) stations. Three memory levels are
available for the FM waveband, and one
memory level is available for each of the
MW and LW bands. Five stations can
be stored in each memory level.
Selecting FM Memory Level
To switch between the FM memory lev-
els FM1, FM2 and FMT
➮ press the BAND button 2.
Selecting AM waveband
To select the AM waveband
➮ press the BAND button 2 until
“AM” appears in the display.
Setting the Station
There are a number of ways to set the
station.
Automatic Station Search
➮ Press the or button 9.
The next station that can be received is
tuned in.
Adjusting Station Search
Sensitivity
You can choose whether to search only
for stations with strong signals, or wheth-
er weak stations should be included.
➮ Press the MENU button :.
➮ Press the or button 9 until
“SENS HI” or “SENS LO” appears
in the display.
“SENS HI” means maximum sensitivi-
ty, “SENS LO” means minimum sensi-
tivity. When “SENS LO” is selected, the
display shows “lo”.
➮ Set the desired sensitivity with the
buttons 9.
➮ When the setting procedure
is complete, press the MENU
button :.
Manual Station Tuning
You can also tune to the station manu-
ally.
➮ Press the or button 9.
Saving a Station
Saving a Station Manually
➮ Choose between memory levels
FM1, FM2, FMT or the AM wave-
band (MW/LW).
➮ Tune to the station you want.
➮ Choose one of the station buttons
1-5 ; on which you want to store
the station, and hold it pressed for
longer than one second.
RADIO OPERATION