Filter
Top Products
35
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
To switch between the FM memory
banks (FM1, FM2 and FMT) and the
MW and LW wavebands,
➮ briefly press the BND•TS button
4.
Tuning into a station
There are various ways of tuning into a
station.
Automatic station seek tuning
➮ Press the or button 7.
The radio tunes into the next receiva-
ble station.
Tuning into stations manually
You can also tune into stations manual-
ly.
Note:
● You can only tune into stations
manually if the RDS function is de-
activated.
➮ Press the or button 7.
Browsing through broadcasting
networks (only FM)
If a radio station provides several pro-
grammes, you have the option of brows-
ing through its so-called “broadcasting
network”.
Note:
● The RDS function must be activat-
ed before you can use this feature.
➮ Press the or button 7 to
switch to the next station on the
broadcasting network.
Note:
● When using this feature, you will
only be able to switch to stations
that you have received once before
already. To receive the stations,
use the Scan or Travelstore func-
tion.
Setting the sensitivity of station
seek tuning
You can choose whether the radio
should only tune into stations providing
good reception or whether it can also
tune into those with a weak reception.
➮ Press the MENU button 8.
➮ Press the or button 7 re-
peatedly until “SENS” appears in
the display.
➮ Press the button 7.
The display shows the currently set sen-
sitivity level. “SENS HI6” means that the
tuner is set to the highest sensitivity
setting. “SENS LO1” means it is set to
the lowest sensitivity setting.
➮ Set the sensitivity level that you
want using the buttons 7.
When you have finished making your
changes,
➮ press the MENU button 8.
Note:
● You can set different sensitivity lev-
els for FM and MW or LW (AM).
RADIO MODE