Filter
Top Products
36
Storing stations
Storing stations manually
➮ Select the memory bank (i.e. FM1,
FM2, FMT) that you want or one of
the wavebands (MW or LW).
➮ Tune into the station that you want.
➮ Press and hold down one of the
station buttons 1 - 6 9 for longer
than two seconds to assign the sta-
tion to that button.
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tions providing the best reception in the
region (only FM). The stations are stored
in the FMT memory bank.
Note:
● Any stations that were previously
stored in this memory bank are de-
leted in the process.
➮ Press and hold down the BND•TS
button 4 for longer than two sec-
onds.
The storing procedure begins. “FM
TSTORE” appears in the display. After
the process has completed, the radio
will play the station that is stored in
memory location 1 of the FMT memory
bank.
Listening to stored stations
➮ Select the memory bank or wave-
band.
➮ Press the station button 1 - 6 9
that corresponds to the station that
you want to listen to.
Scanning receivable stations
(SCAN)
You can use the scan function to briefly
play all the receivable stations. You can
set the scanning time in the menu to
between 5 and 30 seconds.
Starting SCAN
➮ Press and hold down the MENU
button 8 for longer than two sec-
onds.
Scanning begins. “SCAN” appears
briefly in the display followed by a flash-
ing display of the current station name
or frequency.
Cancelling SCAN and continuing
listening to a station
➮ Press the MENU button 8.
Scanning stops and the radio continues
playing the station that it tuned into last.
Setting the scanning time
➮ Press the MENU button 8.
➮ Press the or button 7 re-
peatedly until “SCAN TIME” ap-
pears in the display.
➮ Set the scanning time that you
want using the buttons 7.
RADIO MODE