Filter
Top Products
32
Switching REGIONAL on/off
➮ Press the MENU button 8.
➮ Press the or button 7 re-
peatedly until “REG” appears in
the display. “OFF” or “ON” is dis-
played alongside “REG”.
➮ To switch REGIONAL on/off, press
the
or button 7.
➮ Press the MENU button 8.
Selecting the waveband /
memory bank
This device can receive programmes
broadcast over the FM frequency
range as well as the MW and LW (AM)
wavebands (MW and LW only on the
Malaga CD36). There are three mem-
ory banks available for the FM wave-
band (FM1, FM2 and FMT) and one
for each of the MW and LW wave-
bands. Six stations can be stored in
each memory bank.
To switch between the FM memory
banks (FM1, FM2 and FMT) and the
MW and LW wavebands,
➮ briefly press the BND•TS button
;.
Tuning into a station
There are various ways of tuning into
a station.
Automatic station seek tuning
➮ Press the or button 7.
The radio tunes into the next receiva-
ble station.
Tuning into stations manually
You can also tune into stations manu-
ally.
Note:
● You can only tune into stations
manually if the RDS function is
deactivated.
➮ Press the or button 7.
Browsing through broadcasting
networks (only FM)
If radio stations provide several pro-
grammes, you have the option of
browsing through their “broadcasting
networks”.
Note:
● The RDS function must be activat-
ed before you can use this fea-
ture.
➮ Press the or button 7 to
switch to the next station on the
broadcasting network.
Note:
● When using this feature, you will
only be able to switch to stations
that you have received once be-
fore already. To receive the sta-
tions, use the scan function or the
Travelstore function.
Setting the sensitivity of station
seek tuning
You can choose whether the radio
should only tune into stations provid-
ing good reception or whether it can
also tune into those with a weak re-
ception.
➮ Press the MENU button 8.
RADIO MODE
02Kiel_MalagaCD36 gb 15.02.2006, 11:59 Uhr32