Filter
Top Products
31
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Radio mode
This device is equipped with an RDS
radio receiver. Many of the receivable
FM stations broadcast a signal that not
only carries the programme but also
additional information such as the sta-
tion name and programme type (PTY).
The station name appears in the dis-
play as soon as the tuner receives it.
Adjusting the tuner settings
To ensure that the tuner works proper-
ly, the device must be configured for
the region in which you are using it.
You can choose between Europe (EU-
ROPE), United States (USA), South
America (S-AMERICA) and Thailand
(THAI). By default, the tuner is set to
the region in which the device was sold.
If you encounter problems with radio
reception, please check this setting.
The radio functions described in these
operating instructions refer to the EU-
ROPE tuner setting.
➮ Press and hold down the 1 and 5
buttons : simultaneously and
switch on the device again by
pressing button 1.
“TUNER” is displayed.
➮ Select your tuner region using the
or button 7.
To save the setting,
➮ switch the device off and on again
or wait approx. 8 seconds. The
car sound system starts with the
last setting activated (radio, CD,
CD changer or AUX).
Switching to radio mode
If you are in CD, CD-changer or AUX
mode,
➮ press the BND•TS button ;
or
➮ press the SRC button 2 re-
peatedly until the memory bank
(e.g. “FM1”) appears in the display.
RDS functions
The convenient RDS functions AF (Al-
ternative Frequency) and REGIONAL
extend your radio’s range of functions.
● AF: If the RDS function is activat-
ed, the radio automatically tunes
into the best receivable frequency
for the station that is currently set.
● REGIONAL: At certain times,
some radio stations divide their
programme into regional pro-
grammes providing different con-
tent. You can use the REG func-
tion to prevent the car radio from
switching to alternative frequen-
cies that are broadcasting different
programme content.
Note:
● REGIONAL must be activated/de-
activated separately in the menu.
Switching the RDS function on/off
If you want to use the RDS functions
(AF and REGIONAL),
➮ press and hold down the TRAF
RDS button 6 for longer than two
seconds.
The RDS function is active when an
RDS symbol lights up in the display.
RADIO MODE
02Kiel_MalagaCD36 gb 15.02.2006, 11:59 Uhr31