Filter
Top Products
29
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Radio Operation
Last Station Memory
Each FM bank and AM band has its own last station memory which holds last-tuned frequency
for that band or bank irrespective of whether that frequency is stored into a preset.
Selecting Bands
Press SRC as needed to access FM1, FM2, FM3/FMT, AM/AMT banks.
Seek Tuning
Press or to seek next receivable frequency. Tuning stops at frequency that fulfills sensitivity
requirements predetermined by sensitivity set through SENS button.
Tuning Sensitivity (SENS)
Press SENS for more that 2 seconds to switch between local (lo) and distant (dx) search
sensitivity.
Radio Reception Hints
• When listening to weak or distant AM stations, adjusting the Treble to minimum (-7) will
reduce noise and improve sound.
• In general, set SENS to DX if in rural areas or where stations tend to be weak and distant,
and to LO when in metropolitan areas or where stations tend to be strong and local.
Stereo Symbol
Stereo symbol turns on if a stereo station with a sufficiently strong signal is received. The unit
gradually switches between mono to stereo automatically.
Manual Tuning
Press or for more than 1/2 second and frequency will go one channel/step in direction
pressed. Press and hold causes continuous manual tuning. Unit returns to seek tuning mode
after 4 seconds or after storing a station on a preset.
Preset Station Storage
After tuning desired frequency on desired band, press and hold a Preset Button for more than
2 seconds to store current frequency. Audio is muted during storage, preset number appears,
and beep acknowledges storage.
Preset Station Selection
Press desired Preset Button.
Travelstore
In any FM Bank, press TS for 2 seconds to activate FM Travelstore. (In AM Bank, press it for 2
seconds to activate AM Travel Store.) “TS” appears. Beginning at the bottom of the band, TS
stores five relatively strong stations and returns to preset 1. To cancel search operation, press
TS, any present button or the or key.
Station Scan Tuning
Press SCA. Frequency blinks during scanning. Unit stops at receivable stations for 4 seconds.
Unit continuously scans until user stops scan by pressing SCA, another tuning button or SRC.
Lima CR47 gb® 13.05.2002, 10:37 Uhr29