Filter
Top Products
14
Radio Operation
Last Station Memory
Each FM bank and AM band has its own last station memory which holds last-tuned frequency
for that band or bank irrespective of whether that frequency is stored into a preset.
Selecting Bands
Press SRC as needed to access FM1, FM2, FM3/FMT, AM/AMT banks.
Seek Tuning
Press /\ or V to seek next receivable frequency. Tuning stops at frequency that fulfills sensitivity
requirements predetermined by sensitivity set through SENS/LD button.
Tuning Sensitivity (SENS)
Press SENS/LD for more that 2 seconds to switch between local (lo) and distant search
sensitivity.
Radio Reception Hints
• When listening to weak or distant AM stations, adjusting the Treble to minimum (-7) will
reduce noise and improve sound.
• In general, set SENS to DX if in rural areas or where stations tend to be weak and distant,
and to LO when in metropolitan areas or where stations tend to be strong and local.
Stereo Symbol
Stereo symbol turns on if a stereo station with an incoming signal of at least 20 dBµV is
received. The unit gradually switches between mono to stereo automatically.
Manual Tuning
Press /\ or V for more than 1/2 second and frequency will go one channel/step in direction
pressed. Press and hold causes continuous manual tuning. Unit returns to seek tuning mode
after 4 seconds or after storing a station on a preset.
Preset Station Storage
After tuning desired frequency on desired band, press and hold a Preset Button for more than 2
seconds to store current frequency. Audio is muted during storage, preset number appears, and
beep acknowledges storage.
Preset Station Selection
Press desired Preset Button.
Travel Store
In any FM Bank, press SCA/TS for 2 seconds to activate FM Travel Store. (In AM Bank, press it
for 2 seconds to activate AM Travel Store.) TS appears. Beginning at the bottom of the band, TS
stores five relatively strong stations and returns to preset 1. Pressing any tuning-related button
cancels search operation.
Station Scan Tuning
Press SCA. Frequency blinks (along with preset number if appropriate) during scanning. Unit
stops at receivable stations for 4 seconds. Unit continuously scans until user stops scan by
pressing SCA, another tuning button or SRC.
BA Hannov. CR67 SEA gb® 29.04.2002, 13:29 Uhr14