Filter
Top Products
31
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
? SC
Radio operation
Scan
Press SC briefly.
The scanned frequency or the station
name will start flashing in the display.
During the actual scanning process
“FM-SCAN” or “AM-SCAN” will be dis-
played. The unit will scan all FM sta-
tions which can be received.
Preset Scan
Press SC for approximately 1 sec. until
you hear a beep.
“SCAN” and the name or frequency of
the scanned station will alternately ap-
pear in the display.
The unit will scan all stations stored on
the preset buttons.
To stop Scan / Preset Scan:
Press SC once again.
Extra function of lo button:
To switch between mono and stereo
reception:
Press button for approximately 1 sec.
(beep).
The selected condition will be briefly
displayed.
=
/
To switch the tape side: Press briefly.
To eject the tape: Press for approxi-
mately 1 sec.
Extra function /
Frequency display during radio opera-
tion:
Press button briefly.
The frequency will be briefly displayed.
> Cassette loading slot
Insert the tape with side A or 1 facing
up, the open side showing to the right.
Extra function of preset buttons
To store and recall a PTY programme
type.
When PTY is active (“PTY” lights up in
the display), you can store and recall
one programme type on/from each
preset button on FM.
; SRC (Source)
You can switch between the radio,
tape and CD changer operating
modes, provided that a cassette/CD is
inserted.
< lo
To switch the seek tuning sensitivity
level:
Press button briefly.
If “lo” is displayed, the radio will only
pick up strong, local stations (normal
sensitivity).
If “lo” does not light up, the radio will
also pick up weaker, distant stations
(high sensitivity).
Coburg ..RCM127 gb 13.02.2001, 10:19 Uhr31