Filter
Top Products
34
Displaying the selected programme
type
• Press << or >>.
The programme type selected last will be
displayed briefly.
Selecting a programme type
a) Using the preset buttons
When PTY is switched on, you can use
the preset buttons 1-6 to select the
programme types stored at the factory.
• Press one of the presets 1-6.
The selected programme type will be
displayed for 2 seconds.
If you would like to listen to a station
with this PTY,
• press
/ to start the seek tuning
function.
If the radio is unable to find a station offer-
ing the selected programme type, the dis-
play will show “NO PTY” and a beep tone
will be emitted. The radio will select the sta-
tion which was tuned into before seek tun-
ing was activated.
You can assign different programme types
to each preset position. Please refer to the
next section on “Storing programme types”.
b) Using the << >> buttons on the rocker
switch
When PTY is switched on, you can
select a programme type using buttons
<< >>.
• Press << or >>; the programme
type selected last will be displayed
for 3 seconds.
• During this period press >> (for-
wards) or << (backwards) to select
the desired type.
• Press << or >> as many times as
required.
If you would like to listen to a station
with the selected PTY,
• press
/ to start the seek tuning
function.
If the radio is unable to find a station offer-
ing the selected programme type, the dis-
play will show “NO PTY” and a beep tone
will be emitted. The radio will select the sta-
tion which was tuned into before seek tun-
ing was activated.
CULTURE
SCIENCE
VARIED
POP MUSIC
ROCK MUSIC
CLASSICS
Switching PTY ON/OFF
• Press PTY.
When the function is active, the programme
type selected last will briefly appear in the
display. “PTY” will appear permanently.
Checking the programme type of the
station
• Press PTY for approximately 2 sec-
onds.
After the beep tone the display will show the
programme type offered by the tuned in sta-
tion. If “NONE” appears in the display, the
current station has no PTY code.