Filter
Top Products
27
ENGLISH DEUTSCHFRANÇAISITALIANO
NEDERLANDS
SVENSKAESPAÑOL
PORTUGUÊS
>...C - Preset buttons 1 to 6
Radio mode
You can store six stations in each
memory bank (1, 2, and “T”).
On MW and LW you can store six sta-
tions each
(except for Freiburg RCM
148, Kingston DJ)
.
Store station - hold down a preset
button in radio mode until a beep is
emitted.
Recall station - select a waveband
and also the memory bank on FM;
press the relevant preset button briefly.
The selected preset button will briefly
appear in display field 1 (e.g. P1).
Changer mode
3/ - Pause
Interrupts CD play. “PAUSE” appears.
Press button again to restart CD play.
4/RPT
Repeat title: press 4/RPT. “REPEAT-T”
appears briefly. The title will be repeat-
ed until 4/RPT is pressed again.
Repeat CD: select “REPEAT-D”.
Switch REPEAT-D on:
• Hold 4/RPT down until a beep is
emitted.
5/MIX
“MIX CD” plays the titles of one CD in
random order.
“MIX ALL” plays the titles of all CDs of
one changer magazine in random or-
der.
To turn MIX on/off:
Press 5/MIX briefly.
The current setting is briefly indicated
in the display: “MIX-CD”.
Switch MIX-ALL on:
• Hold 5/MIX down until a beep is
emitted.
D
DIS - clock display
Radio mode
Press this button briefly and the time
will be displayed for a while.
Changer mode
Press this button to switch the display
between CD number and CD time indi-
cation.
Cassette mode
Press this button to switch the display
between the cassette direction and
clock indication.
E DSC Direct Software Control
Adjusts programmable basic settings.
Refer to “DSC programming”.
F AUD
Default settings for treble and bass
You can store different settings for the
FM, MW, LW, cassette and CD mode
(Freiburg RCM 148, Kingston DJ with-
out MW, LW)
.
Setting the tone:
Select the audio mode. Press AUD
once and set the tone using the rocker
switch.
Treble:
Treble +
Treble –
Bass:
Bass –
Bass +
Press AUD twice and set the fader
using the rocker switch.
Fader front
Fader rear
Balance left
Balance right
The selected values will appear in the
display. The last setting is stored auto-
matically.