Filter
Top Products
11
FRANÇAIS
ENGLISH
ESPAÑOL
PORTUGUÊS
Radio mode
Switching to radio mode
If you are in CD, CD changer or AUX
mode,
➮ press the FM 4 / AM 5 button
or
➮ keep pressing the CD•C button @
until “RADIO” appears in the dis-
play.
Selecting the frequency range /
memory
This unit can receive programmes
broadcast over the FM and AM frequen-
cy ranges. There are three preset mem-
ory levels for the FM range and one for
the AM range. Six stations can be stored
on each memory level.
Selecting the FM memory level
➮ Press the FM button 4 to switch
between the FM memory levels
(FM1, FM2 and FMT).
Selecting the AM frequency range
➮ Press the AM button 5 to select
the AM frequency range.
Tuning into a station
There are various ways of tuning into a
station.
Automatic seek tuning
➮ Press the or button :.
The unit tunes into the next receivable
station.
Setting the sensitivity for station
seek tuning
You can configure the radio to only tune
into stations with a strong reception or
to also tune into those with a weak re-
ception.
➮ Press the MENU button 8.
➮ Keep pressing the or button
: until “SENS HI” or “SENS LO”
appears in the display.
“SENS HI” means that the tuner is highly
sensitive. “SENS LO” means it is set to
the lowest sensitivity setting. If “SENS
LO” is selected, “lo” lights up in the dis-
play.
➮ Set the required sensitivity using
the
and buttons :.
When you have finished making your
changes,
➮ press the MENU button 8 or OK
;.
Tuning into stations manually
You can also tune into stations manually.
➮ Press the or button :.
Storing stations
Storing stations manually
➮ Select the required memory level
(FM1, FM2 or FMT) or the AM fre-
quency range.
➮ Tune into the station.
➮ Press one of the station buttons 1-
6 > for longer than one second to
store the station to that button.
RADIO MODE