Filter
Top Products
12
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tions with the strongest reception in the
region. The stations are stored in the
FMT or AM memory depending on the
selected frequency range.
Note:
● Stations that were previously
stored in this memory are deleted
in the process.
➮ Briefly press the TS button ?.
The station storing procedure begins.
“TRAVEL-STORE” appears in the dis-
play. After the process is completed, the
station that is stored in location 1 of the
respective memory level will be played.
Listening to preset stations
➮ Select the memory level on which
the station was stored.
➮ Press the preset station button 1-6
> of the station you want to listen
to.
Scanning receivable stations
(SCAN)
You can briefly play all the receivable
stations. You can set the scanning time
to between 5 and 30 seconds in the
menu.
Starting SCAN
➮ Keep the OK button ; pressed
until the scan process starts.
“SCAN” appears briefly in the display
followed by the current frequency (which
flashes).
Stopping SCAN and continuing
listening to a station
➮ Press the OK button ;.
Scanning is stopped and the station that
was tuned into last will remain active.
Setting the scantime
➮ Press the MENU button 8.
➮ Keep pressing the or button
: until “SCANTIME” appears in
the display.
➮ Set the required scantime using
the
and buttons :.
When you have finished making your
changes,
➮ press the MENU button 8 or OK
; twice.
Note:
● The set scantime also applies to
scanning in CD and CD changer
mode.
Tuner configuration
This unit is equipped with a multiband
tuner. The tuner can be configured to
suit the requirements that are specific
to various countries. The countries/re-
gions available are: America, Europe,
Asia and Thailand. The tuner will only
function optimally if it is configured for
the country/region in which the unit is
being operated.
Configuring the tuner
➮ Press the MENU button 8.
➮ Keep pressing the or button
: until “FM TUNER” appears in
the display.
RADIO MODE