Filter
Top Products
36
The RDS function is active when an
RDS symbol lights up in the display.
Switching REGIONAL on/off
➮ Press the MENU button 8.
➮ Press the or button 7 re-
peatedly until “REG” appears in
the display. “OFF” or “ON” is dis-
played alongside “REG”.
➮ To switch REGIONAL on/off, press
the or button 7.
➮ Press the MENU button 8.
Selecting the waveband /
memory bank
This device can be used to receive sta-
tions in the FM frequency band. Three
memory banks (FM1, FM2, and FMT)
are available for the FM waveband.
Six stations can be stored in each
memory bank.
To switch between the memory banks
FM1, FM2, and FMT,
➮ briefly press the BND•TS button
;.
Tuning into a station
There are various ways of tuning into
a station.
Automatic station seek tuning
➮ Press the or button 7.
The radio tunes into the next receiva-
ble station.
Tuning into stations manually
You can also tune into stations manu-
ally.
Note:
● You can only tune into stations
manually if the RDS function is
deactivated.
➮ Press the or button 7.
Browsing through broadcasting
networks (only FM)
If radio stations provide several pro-
grammes, you have the option of
browsing through their “broadcasting
networks”.
Note:
● The RDS function must be activat-
ed before you can use this fea-
ture.
➮ Press the or button 7 to
switch to the next station on the
broadcasting network.
Note:
● When using this feature, you will
only be able to switch to stations
that you have received once be-
fore already. To receive the sta-
tions, use the scan function or the
Travelstore function.
Setting the sensitivity of station
seek tuning
You can choose whether the radio
should only tune into stations provid-
ing good reception or whether it can
also tune into those with a weak re-
ception.
RADIO MODE
02EssenMP36 gb 17.02.2006, 14:13 Uhr36