Filter
Top Products
46
Setting the sensitivity of station
seek tuning
You can choose whether the radio should
only tune into stations providing good re
-
ception or whether it can also tune into
those with a weak reception.
Press the
MENU button 9.
Press the
or button : repeatedly
until "SENS" appears on the display.
The display shows the currently set sensitiv
-
ity level. "SENS HI3" means that the tuner is
set to the highest sensitivity setting. "SENS
LO1" means it is set to the lowest sensitiv
-
ity setting.
Set the desired sensitivity level using
the
or button :.
When you have finished making your chang
-
es,
press the
MENU button 9.
Note:
You can set different sensitivity levels
for FM and MW or LW (AM).
Storing stations
Storing stations manually
Select the desired memory bank (FM1,
FM2, FMT) or one of the wavebands
(MW or LW).
Tune into the desired station.
Press and hold down one of the station
buttons
1 - 6 for longer than two sec-
onds to assign the station to that but
-
ton.
Storing stations automatically
(Travelstore)
You can automatically store the six stations
offering the strongest reception in the re
-
gion (FM only). The stations are stored in
the FMT memory bank.
Note:
Any stations that were previously
stored in this memory bank are deleted
in the process.
Press and hold down the
BND•TS but-
ton
6 for longer than two seconds.
The storing procedure begins. "FM TSTORE"
appears on the display. After the process
has completed, the radio will play the sta
-
tion that is stored in memory location 1 of
the FMT memory bank.
Listening to stored stations
Select the memory bank or waveband.
Press one of the station buttons
1 - 6
;.
The stored station is played if it can be re
-
ceived.
Scanning receivable stations
(SCAN)
You can use the scan function to play all the
receivable stations briefly. You can set the
scanning time in the menu to between 5
and 30 seconds.
Starting SCAN
Press and hold down the
MENU button
9 for longer than two seconds.
Scanning begins.
Radio mode