Filter
Top Products
57
ENGLISH
Changing the display
Five options are available for the display in
CD changer mode:
Track number and playing time
Track number and time
CD number and track number
CD number and time
CD number and playing time
To switch between the display options,
press and hold down the
DISPL but-
ton
8 for longer than two seconds.
Repeating individual tracks or
whole CDs (REPEAT)
To repeat the current track,
briefly press the
4 RPT button ;.
"RPT TRCK" appears briefly and RPT lights
up on the display.
To repeat the current CD,
press and hold down the
4 RPT button
; for longer than two seconds.
"RPT DISC" appears briefly and RPT lights
up on the display.
Cancelling repeat
To stop the current track or current CD from
being repeated,
briefly press the
4 RPT button ;.
"RPT OFF" appears and RPT disappears on
the display.
Random track play (MIX)
To play the tracks on the current CD in ran-
dom order,
briefly press the
5 MIX button ;.
"MIX CD" appears briefly and MIX lights up
on the display.
•
•
•
•
•
To play the tracks on all inserted CDs in ran
-
dom order,
press and hold down the
5 MIX button
; for longer than two seconds.
"MIX ALL" appears briefly and MIX lights up
on the display.
Cancelling MIX
briefly press the
5 MIX button ;.
"MIX OFF" appears and MIX on the display
disappears.
Scanning all tracks on all CDs
(SCAN)
To scan (briefly play) all the tracks on all the
inserted CDs in ascending order,
press the
MENU button 9 for longer
than two seconds.
"TRK SCAN" appears on the display and the
number of the current track flashes.
Stopping Scan
To stop scanning,
briefly press the
MENU button 9.
The currently played track will then contin
-
ue to be played normally.
Note:
You can set the scanning time. For
further information, please read the
section entitled "Setting the scanning
time" in the "Radio mode" chapter.
Interrupting playback (PAUSE)
Press the 3 button ;.
"PAUSE" appears on the display.
Cancelling pause
During the pause, press the button
3 ;.
Playback is continued.
CD-changer mode