Filter
Top Products
43
DANSK
ENGLISH DEUTSCHFRANÇAISITALIANO
NEDERLANDS
SVENSKAESPAÑOL
PORTUGUÊS
Listening to stored stations
Select the memory bank or waveband.
Press one of the station buttons
1 - 6
;.
The stored station is played if it can be re
-
ceived.
Scanning receivable stations
(SCAN)
You can use the scan function to play all the
receivable stations briefly. You can set the
scanning time in the menu to between 5
and 30 seconds.
Starting SCAN
Press and hold down the
MENU button
9 for longer than two seconds.
Scanning begins.
"SCAN" appears briefly in the display fol
-
lowed by a flashing display of the current
station name or frequency.
Cancelling the SCAN and continuing to
listen to a station
Press the
MENU button 9.
Scanning stops and the radio continues
playing the station that it tuned into last.
Setting the scanning time
Press the MENU button 9.
Press the
or button : repeat-
edly until "SCAN TIME" appears on the
display.
Set the desired scan time using the
or button :.
When you have finished making your chang
-
es,
press the
MENU button twice 9.
Note:
The defined scanning time is also ap
-
plied by the system to scanning carried
out in CD and CD changer mode.
Programme type (PTY)
Besides transmitting the station name,
some FM stations also provide informa
-
tion on the type of programme that they are
broadcasting. Your car radio can receive
and display this information.
For example, the programme types can be:
CULTURE TRAVEL JAZZ
SPORT SERVICE POP
ROCK KNOWLEDGE KIDS
You can use the PTY function to select sta
-
tions of a particular programme type.
PTY-EON
If you specify the programme type and start
seek tuning, the radio will switch from the
current station to a station of the selected
programme type.
Notes:
If the tuner does not find a station
that corresponds to the selected pro
-
gramme type, you will hear a beep
and "NO PTY" appears briefly in the
display. The radio will then retune to
the station that it received last.
•
Radio mode
02_SCruz_ValenciaMP36_eng.indd 43 07.02.2006 11:22:25 Uhr