Filter
Top Products
44
Automatically storing the stron-
gest stations with Travelstore
You can automatically store the six most
powerful FM stations of your current recep-
tion area sorted according to their signal
strength. This function is particularly con-
venient on longer trips.
• Press the FM
T button for two seconds.
“T-STORE” will appear in the display.
The six strongest FM stations will be auto-
matically stored on the memory bank “T”
(Travelstore). When this process has been
completed, the radio will play the first sta-
tion.
If desired, stations can also be stored
manually on the Travelstore bank (see
“Storing stations”).
Recalling stored stations
You can recall any stored station at the touch
of a button.
• Select the waveband by pressing FMT
or M•L. On FM, also choose the corre-
sponding memory bank by pressing
the FMT button as many times until the
desired bank appears in the display.
•
Press the corresponding preset button
briefly to recall the station.
Scanning stored stations with
Preset Scan
You can have all of the stored stations briefly
scanned on all wavebands.
To start Preset Scan:
• Press SC for approximately two secon-
ds.
All of the stored stations of the adjusted
waveband will be scanned one after the
other. The memory bank and preset posi-
tion of the currently scanned station will flash
in the display.
To select a scanned station and switch
off Preset Scan:
• Press SC briefly.
Scanning stations with Radio-
Scan
You can also scan all stations which can be
received.
To start the Scan function:
• Press SC briefly.
The scanned frequency or the station name
will start flashing in the display. During the
actual scanning process “FM-SCAN” or
“AM-SCAN” will be displayed.
To select a scanned station and switch
off the Radio-Scan function:
• Press SC briefly.
If no station is selected, the scan function
will be automatically switched off after the
frequency band has been run through com-
pletely. The unit will tune in the station lis-
tened to before starting the scan.
Changing the scan time
The scan time can be changed from be-
tween five to a maximum of 30 seconds.
Please refer to chapter “DSC programming
- SCANTIME”.
Selecting the seek tuning sensi-
tivity
You can alter the automatic seek tuning
sensitivity.
If “lo” is displayed, the radio will only pick up
strong, local stations (low sensitivity).
If “lo” does not light up, the radio will also
pick up weaker, distant stations (high sen-
sitivity).
The sensitivity level can be altered in both
modes (see also chapter “DSC program-
ming”).
Stockh. RCM126 gb® 30.04.2002, 15:25 Uhr44