Filter
Top Products
39
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Scanning stations with PTY SCAN
Important: "PTY" must appear in the dis-
play.
• Press SCA.
All of the stations in your current reception
area offering the selected programme type
will be scanned.
To switch off PTY-SCAN:
• Press SCA again.
PTY priority
Situation:
PTY is switched on and lights up in the dis-
play.
No station offering the selected program-
me type can be found currently in your re-
ception range (with seek tuning or scan).
The set will switch back to the station pre-
viously tuned into.
As soon as it is possible to receive a pro-
gramme in the broadcast network with the
PTY selected, the radio will switch over to
the corresponding station for the duration
of the programme.
Example:
- Station playing: NDR3.
- "PTY" lights up in the display.
- Programme type "POP" selected.
- Seek tuning is started.
• press
/ to start the seek tuning
function.
If the radio is unable to find a station offe-
ring the selected programme type, the dis-
play will show "NO PTY" and a beep tone
will be emitted. The radio will select the sta-
tion which was tuned into before seek tu-
ning was activated.
Storing programme types
Each of the preset buttons 1-6 has been
assigned one programme type at the fac-
tory.
If desired, you can also replace these with
other available programme types.
To do so, make sure that "PTY" lights up in
the display.
• If necessary, press the PTY button to
switch on the function.
• Select a programme type using buttons
<<>> and
• hold down the desired preset button (1-
6) until you hear a beep.
Now the selected programme type can be
recalled by pressing this preset as long as
"PTY" lights up in the display.
- No station with "PTY-POP" can be
found.
- The display shows "NO PTY" and
- automatically switches back to NDR3.
- NDR2 airs a "PTY-POP" programme.
- The radio will switch to the linked stati-
on NDR2 for the duration of the "POP"
programme.
During cassette or CD operation, the set
will also switch to the radio programme if
the selected PTY becomes available within
the broadcast network.
After the PTY programme has ended the
system will switch back to the previous
mode (radio, cassette or CD).
Note:
As already mentioned, these functions are
only supported by a limited number of RDS
stations at the present time.
St.TropRavLasVegasDJ gb 22.03.2001, 16:11 Uhr39