Filter
Top Products
41
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
"FORWARD" or "REWIND" will light up in
the display.
Press the button indicating the opposite di-
rection or
/ to stop the function.
If you have activated "Radio Monitor ON",
the unit will play the radio station last sel-
ected while the tape is winding. You can
alter the Radio Monitor setting in DSC
mode.
Tape type selection
If you are playing METAL or CrO
2
casset-
tes, press MTL. "MTL" will then light up in
display field 1.
DOLBY B NR (Noise reduction)*
Cassettes which have been recorded with
the DOLBY B NR system exhibit consi-
derably less tape noise and higher dyna-
mics. To play cassettes recorded using this
system, press
.
will light up in display field 3
Cassette eject
Press to eject the cassette.
Cassette deck operation
Cassette playback
Insert the tape into the slot with the open
side showing to the right. Press SRC to
select the tape deck mode. "CASSETTE"
will appear in the display. The tape will play
in the direction "TAPE 1".
If a tape is already inside, press SCR to
select "CASSETTE" mode. The tape will
play in the direction last selected.
Reversing the tape
Press to change the tape direction du-
ring cassette playback from TAPE1 to
TAPE2 or
vice versa:
At the end of the tape, the unit will automa-
tically switch to the opposite side.
Skipping cassette titles
CPS stands for Cassette Program Search
and allows you to skip over songs on the
tape.
The titles must, however, be separately by
at least 3 seconds of blank tape.
During tape playback press either
or
on the rocker switch to activate the CPS
mode. "CPS FF" or "CPS FR" will appear
in the display. Press the button
/ repea-
tedly to skip the corresponding number of
titles in either direction.
The number of titles to be skipped will ap-
pear in the display and count down until the
title selected has been reached.
Press the button indicating the opposite di-
rection or << >> to stop the function.
Repeat song titles
During tape playback press 4/RPT. "RPT"
will light up in display field 3; "REPEAT-T"
will appear briefly in display field 2. While
the tape is rewinding, "REWIND-T" will ap-
pear in the display. The title playing will re-
peat until you press 4/RPT again. "RPT"
will disappear from the display.
Playback will now continue normally.
Scan
To scan all of the songs on a tape, press
SCA. "SCAN" will appear in the display.
All of the titles on the tape in the tape deck
will be scanned briefly one after the other.
Press SCA again to switch the SCAN
function off. The title currently playing will
continue to play.
Fast winding
Use the rocker switch to fast forward or
rewind the tape during cassette operation:
>> forward
<< rewind.
St.TropRavLasVegasDJ gb 22.03.2001, 16:11 Uhr41