Filter
Top Products
27
Wiesbaden RCM 85
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
To select a station currently being scan-
ned and switch off the scan function:
• Press SC/MIX briefly.
If no station is selected, the scan function will
be automatically switched off after the fre-
quency band has been run through comple-
tely. The unit will tune in the station listened
to before starting the scan.
Selecting the seek tuning sensi-
tivity
You can alter the automatic seek tuning
sensitivity.
If “lo” is displayed, the radio will only pick up
strong, local stations (low sensitivity).
If “lo” does not light up, the radio will also pick
up weaker, distant stations (high sensitivity).
To switch over,
• Press lo.
The degree of sensitivity can be altered in
both modes (see also chapter “DSC pro-
gramming”).
Notice:
Should you tune in a station which has alrea-
dy been stored before, the corresponding
preset button and the memory bank will briefly
flash in the display if you have selected
another memory bank.
Automatically storing the stron-
gest stations with Travelstore
You can automatically store the six most
powerful FM stations of your current recepti-
on area sorted according to their signal
strength. This function is particularly conve-
nient on longer trips.
• Press the
TS button for more than
2 seconds.
The radio will search for the strongest FM
stations and store them on the memory bank
T (Travelstore). When this process has been
completed, the radio will play the first station.
If desired, stations can also be stored manu-
ally on the Travelstore bank (see “Storing
stations”).
Recalling stored stations
You can recall any stored station by pressing
the corresponding preset button.
• Select the waveband using FM or TS.
• Briefly press the corresponding preset
button.
Sampling stored stations briefly
(Preset Scan)
With this function you can briefly sample all
SC/MIX stations.
• Press SC/MIX.
The radio will briefly play all the stored
stations one after another.
The system will sample the stations of one of
the memory banks I, II, or T, depending on
which bank was selected before. Free preset
buttons will be skipped.
To switch off Preset Scan:
• Press SC/MIX once again.
The radio will continue to play the cur-
rently sampled station.
Scanning stations with
Radio-Scan
Beginning with the station currently tuned
in,you can scan the waveband. The radio will
play each station for 8 seconds.
To start the scan:
• Press SC/MIX briefly.
The scanned frequency or the station
name will start flashing in the display.
During the actual scanning process
“SCAN” will be displayed.