Filter
Top Products
25
Wiesbaden RCM 85
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
If “SEARCH” appears in the display when
switching on the radio or recalling one of the
stored frequencies, the unit is automatically
searching for an alternative frequency.
“SEARCH” will disappear from the display
when the alternative frequency has been
found or after the frequency band has been
run through completely.
If the reception quality of the selected pro-
gramme becomes too bad:
• Tune into another station.
REG - regional programme
Certain radio programmes are split up at
times into regional programmes offering lo-
cal information. The 1st programme broad-
cast by NDR, for example, offers program-
mes with different contents in the northern
states of Germany Schleswig-Holstein, Ham-
burg and Lower Saxony at certain times of
the day. If you are listening to one program-
me and move to an area where another
linked regional programme becomes stron-
ger, the unit will switch to that programme.
If you wish to continue listening to the first
programme,
• press the AF button for approximately 2
seconds.
“REG ON” appears in the display.
The display will switch to “CHANGE”.
• Press the KeyCard in, which releases
the card and puts it in the proper positi-
on for being removed.
• Remove the first KeyCard and insert
the new one while “CHANGE” is still
being displayed.
Now you can also use the new KeyCard for
operating your unit.
A maximum of two cards can be used per set.
When trying to „define“ a third one, the
system will automatically delete the access
authorisation of that KeyCard which was not
used for the „learning“ process.
Optical indication for extra
security
When the car is stationary, the KeyCard
tongue can be switched to flash for extra anti-
theft security.
For this, the following requirements must be
fulfilled:
Permanent 12 V supply and the + ignition
lead must be connected correctly (as illustra-
ted in the installations instructions).
„LED 1“ must be adjusted in the DSC mode.
Please refer to chapter „DSC programming -
LED“.
Radio operation with RDS (Radio Data System)
The Radio Data System offers you more
convenience when listening to FM radio sta-
tions.
More and more radio stations have begun to
broadcast RDS information alongside their
programmes.
As soon as a programme has been identified,
the station name including a regional identi-
fier, if applicable, will appear in the display,
for example, NDR1 NDS (regional program-
me in Lower Saxony, Germany).
When RDS is activated, the station buttons
become programme buttons. You now know
exactly which programme you have tuned
into, making it easy to find the desired station
quickly.
But RDS offers you further advantages:
AF - Alternative frequency
The AF (Alternative Frequency) function
makes sure that the strongest frequency of
the currently selected programme is always
tuned in automatically.
This function is activated when “AF” appears
in the display.
In order to switch this function on or off,
• press the AF button briefly.
While searching for the strongest reception
signal, the radio may switch to mute briefly.