Blaupunkt RCR 126 Car Stereo System User Manual


 
26
take advantage of the full RDS service, switch
to “REG OFF”.
Press the REG button briefly.
When active, “REG ON” will be briefly dis-
played each time the radio is switched on.
Selecting a waveband
With this car radio you can select between
the following wavebands:
FM 87.5 - 108 MHz
MW 531 - 1602 kHz
LW 153 - 279 kHz
Select the desired waveband by pres-
sing the FM
T or M•L button.
To switch between MW and LW:
Press M•L.
Automatic tuning
/
Press / ; the car radio will automati-
cally search for the next station.
When keeping the upper or lower part
/ of
the rocker switch depressed, seek tuning will
speed up in upwards or downwards direc-
tion.
Automatic tuning
Up
Down
/ Up/down in short intervals
(“AF” must be switched off)
/ To scroll through the broadcasting
network when “AF” is activated
(e.g. NDR1 ... NDR4).
Manual tuning << >>
(prerequisite: AF is switched off!)
Press << >>; the frequency will change
in short intervals in downwards or up-
wards direction.
When holding the right or left part of the
rocker switch pressed down, the frequency
scan is speeded up.
Scrolling through the broad-
casting network (only FM)
You can use the << >> buttons to tune in
stations of your reception area.
If several programmes of one broadcasting
network can be received, you can scroll
through them in forwards direction pressing
>>, or backwards using the << button, e.g.
NDR 1, 2, 3, 4, N-JOY (North German broad-
caster).
For this it is necessary that the stations have
been received at least once and that “AF” has
been activated before (lights up in the dis-
play).
For this purpose, you may start Travelstore
seek operation:
Press FM
T for 2 seconds; the system
starts to run through the frequency
band.
If “AF” does not light up,
press AF.
With this, the requirements for selecting sta-
tions with << >> are fulfilled.
Changing the memory bank (FM)
You can shift between the memory banks I, II
and T in order to store stations and recall
them later.
The currently selected memory bank is indi-
cated in the display.
Press the FM
T button as many times
until the desired memory bank lights up
in the display.
BA Bolo RCR 126 gb® 03.06.2002, 13:38 Uhr26