Filter
Top Products
27
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Scanning stored stations
with Preset Scan
You can have all of the stored stations played
briefly on all wavebands.
On FM, you can scan the stations of the
Travelstore memory bank or of the two other
storage levels.
• Select the waveband.
• On FM, choose Travelstore or another
memory bank using the FM
T button.
To start Preset Scan:
• Press PS.
The stations will be played for approximately
8 seconds each.
The positions blinking in the display show
you the memory bank and preset position of
the currently scanned station.
To select a station currently being
scanned and switch off Preset Scan:
• Press PS briefly.
Storing stations
On FM, you can store six stations on the
preset buttons 1 to 6 for each of the memory
banks I, II and T.
On MW/LW, you can store six stations each.
• Select the waveband with FM
T or M•L
and on FM also the desired memory
bank (with FM
T).
• Tune in a station with the rocker switch
(either automatically or manually).
• Press the desired preset button until
the radio resumes play after the muting
(takes approximately 2 seconds, confir-
med by beep).
Now the station has been stored.
The activated preset button is indicated in the
display.
Notice:
Should you tune in a station which has alrea-
dy been stored before, the corresponding
preset button and the memory bank will briefly
flash in the display if you have selected
another memory bank.
Automatically storing the stron-
gest stations with Travelstore
You can automatically store the six most
powerful FM stations of your current recepti-
on area sorted according to their signal
strength. This function is particularly conve-
nient on longer trips.
• Press the FM
T button for more than
2 seconds.
The radio will search for the strongest FM
stations and store them on the memory bank
T (Travelstore). When this process has been
completed, the radio will play the first station.
If desired, stations can also be stored manu-
ally on the Travelstore bank (see “Storing
stations”).
Recalling stored stations
You can recall any stored station at the touch
of a button.
• Select the waveband by pressing FM
T
or M•L. On FM, also choose the corre-
sponding memory bank by pressing the
FM
T button as many times until the
desired bank appears in the display.
• Press the corresponding preset button
briefly to recall the station.
BA Bolo RCR 126 gb® 03.06.2002, 13:38 Uhr27