Filter
Top Products
32
Cassette operation
The car stereo has to be switched on.
The unit will automatically switch to tape
operation when inserting a cassette.
Inserting a tape
• Turn on the set.
• Insert a tape.
Track A or 1 will be played.
During cassette operation, “TR 1” or “TR 2”
(track) will appear in the display.
Insert the tape with side A or 1 facing up, the
open side showing to the right.
Ejecting a tape
• Press .
The cassette will eject.
Fast winding
Fast forward
• Press FF (fast forward).
At the end of the tape the unit will au-
tomatically reverse the direction and
start playing the other side.
To stop fast forward
• press FR.
Fast rewind
• Press FR (fast rewind).
At the beginning of the tape the unit
will start playback automatically.
To stop fast rewind
• press FF.
Fast winding
FR : fast rewind - press FF to stop.
FF : fast forward - press FR to stop.
Reversing the tape
Press both buttons at a time.
TR1 or TR2 will appear in the display.
Reversing the tape
To switch to the other side of the tape dur-
ing playback,
• press FR and FF simultaneously.
At the end of the tape the unit will automat-
ically reverse to the other side (autoreverse).
The display shows “TR 1” for track (side) 1
or “TR 2” for track 2.
Notice:
If there is too much tension on the tape dur-
ing playback, the set may reverse the direc-
tion by itself before having reached the end
of the tape side. In this case check the con-
dition of the cassette tape. Sometimes it
helps to rewind it completely.
Listening to the radio during fast
tape winding with RM (Radio
Monitor)
During fast winding of the tape, i.e. when
the radio is normally muted, you can use
the RM function to listen to the radio.
For more information please refer to chap-
ter “DSC programming – RM ON/OFF”.
Augs87/Es/Ver127 gb® 15.05.2002, 11:19 Uhr32