Filter
Top Products
25
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
The system will switch off after approximate-
ly 10 seconds.
When inserting another card type (e.g.
phone or credit card), the display will show
“WRONG KC” for approximately 2 seconds.
The set will switch off automatically.
Remove the wrong card and introduce the
correct KeyCard.
• Turn the knob to switch on the set.
Removing the KeyCard
Never pull out the KeyCard directly!
• First, slightly push in the KeyCard.
This releases the card and puts it in the prop-
er position for being removed.
• Now you can pull it out.
“Training” a second KeyCard/
Replacing a KeyCard
While operating the unit with the first Key-
Card, you can “train” a second one to be
also used with the set:
• Insert the first KeyCard and turn on the
set.
• Press the DSC button and select
“LEARN KC” with
/ .
• Press << or >>.
The display will switch to “CHANGE”.
• Push in the KeyCard. The card is re-
leased and put in the proper position
for being removed.
• Remove the first KeyCard and insert
the new one.
After the display indication “READY” or
“LEARN KC”,
• press DSC.
Now you can also use the new KeyCard for
operating your unit.
A maximum of two cards can be used for
the set.
When trying to “train” a third one, the ac-
cess authorisation for the KeyCard not used
for the “training” process will be deleted au-
tomatically.
Displaying the radio pass data
Using the KeyCard supplied with your set
you can have the radio pass data such as
the model name, product number (7 6..) and
serial number indicated on the display pan-
el.
Please refer to chapter “DSC programming
- READ KC”.
KeyCard theft protection system
This piece of equipment is supplied with one
KeyCard, though you can also operate the
set with a second KeyCard.
If you have lost your KeyCard or if it was
damaged, you can buy a second / extra card
from your specialised dealer.
When using a second KeyCard, the settings
stored on the first card will be adopted. How-
ever, you can individually store the follow-
ing functions:
Bass, treble, balance and fader settings,
Loudness, TA (traffic announcement vol-
ume), beep volume, lo or dx.
In addition, the settings activated before
switching the radio off, such as the station
tuned in, TA priority, AF, AM ON/OFF and
RM ON/OFF will also remain stored.
This ensures that you will find your basic
settings re-adjusted automatically as soon
as you have inserted your KeyCard.
Putting the unit into operation
• Turn on the set.
With the KeyCard tongue sticking out,
introduce the KeyCard into the slot
with the contact area showing up.
The car radio is now ready for operation.
If a wrong KeyCard is inserted, then “CARD
ERR” followed by “WAIT” will appear in the
display. In this case please do not make any
further adjustments.
Augs87/Es/Ver127 gb® 15.05.2002, 11:19 Uhr25