Filter
Top Products
50
• Press / to set the timer.
• Press << to set the hours and >> to set
the minutes.
Once you have completed the setting,
• press
or DSC.
The clock setting for TIMER 1 has been
stored.
Proceed in the same way to set the
TIMER 2.
Recalling stored traffic messag-
es
• Press TIM briefly.
For example, the display shows “NDR2”
(station name or frequency), followed by
“T4 14.30” (T4 = 4th traffic message record-
ed at 2:30 p.m.).
If four traffic messages have been record-
ed, T4 always represents the most recent
bulletin which will also be played back first.
If the traffic memory is still empty, “NO TIM”
will appear on the display panel.
If the display shows four dashes, the clock
has not been reset after the last interruption
of the power supply.
Use the rocker switch
/ to play back any
of the messages T1 to T4.
To repeat a message:
• Press
once.
To select one of the older messages (e.g.
to skip from T4 to T3):
• Press
as many times as required.
To select one of the more recent messages
(e.g. to skip from T2 to T3):
• Press
twice.
When keeping the left or right part of the
rocker switch << >> depressed, the mes-
sage text including its recording time will be
played back quickly in forwards or back-
wards direction.
Press TIM to switch off the function.
TIM standby mode while the ra-
dio is switched off
The TIM standby mode is active if the dis-
play shows “TIM ON” when switching off the
radio.
In this case the radio will record all traffic
bulletins broadcast by the tuned in station
for three hours after having turned off the
set. During this period a motor antenna will
remain extracted.
The set will also record the traffic informa-
tion broadcast for 90 minutes before and
after the programmed TIM times. During
these periods a motor antenna will also re-
main out.
Deactivating the TIM standby
mode
The standby mode will be automatically
switched off if the car radio is not turned on
within 72 hours. Switching the set back on
reactivates the standby function.
You can deactivate the TIM standby mode
separately for TIMER 1 and TIMER 2.
• Press DSC when the radio is on.
• Use the rocker switch
/ to select
“TIMER 1” or “TIMER 2”.
• Then press the button and switch to
“TIM OFF” by means of the rocker
switch / (you will find this item be-
tween the clock settings for 23:00 and
0:00).
When “TIM OFF” is flashing,
• press
.
If you wish to deactivate both timers, pro-
ceed in the same way to switch the other
timer to “TIM OFF” as well.
• Press DSC.
Now the TIM standby mode is inactive.
After having switched off the radio, the dis-
play will go out immediately and a motor
antenna will be pulled in.
London RDM126 gb 20.06.2002, 13:45 Uhr50