Filter
Top Products
CD - Betrieb (Option)
31
DEUTSCH ENGLISH FRANÇAIS ITALIANO
NEDERLANDS
SVENSKA ESPAÑOL
PORTUGUÊS
If no such station is found within approximately 30 seconds, you will hear a warn-
ing beep every 30 seconds. Switch the warning beep off as described above.
Adjusting the volume for traffic announcements
This volume was preset at the factory, though you can alter the value using the
DSC function (see “Programming with DSC – TUNER, TA VOL”).
Adjusting the sound stage for traffic messages and TIM
You can adjust the treble, bass, balance and fader settings separately for both
traffic announcements and TIM.
It is, for example, possible to have only the front left (or right) speaker transmit
the traffic messages.
This provides the driver with the important traffic information without unneces-
sarily bothering the passengers in the vehicle.
To alter the setting:
During an announcement
• press S briefly.
• Select the settings you wish to adjust by pressing the corresponding key,
e.g. treble.
• Press << / >> or / to adjust the sound as you wish to hear it for future
traffic messages.
The last setting made will be stored automatically. 8 seconds after the last set-
ting is made, the unit will switch back to the previous menu. You can return to the
previous menu immediately by
• pressing EXIT
.
S
FADER
BALANCE
TIME
TREBLE
BASS
EXIT
12:13
BA NewYork gb® 24.05.2002, 11:58 Uhr31