Filter
Top Products
ENGLISH
E-4
Setting the equalizer
You can select an equalizer curve for 4 music types (Rock,
Pop, Classic, Jazz).
Selecting the equalizer curve
1. Press the
AUDIO
to select the BAS/TRE adjustment mode.
2. Press the preset button
1
~
6/
to select the desired
equalizer curve. “
” will light on the display window.
•
1
ROCK
•
2
POP
•
3
CLASSIC
•
4/MIX
JAZZ
•
5/RPT
USER 1
•
6/
USER 2
Adjusting the equalizer curve
You can store and adjust the equalizer settings for frequency
and level.
1. Press the
AUDIO
to select the BAS/TRE adjustment mode.
2. Adjust the desired sound characteristics with BAS/TRE/
LOUD/X-BASS.
3. Press the
5/RPT
or
6/
for more than 2 seconds to store
the equalizer curve.
•
5/RPT
USER 1
•
6/
USER 2
Cancelling the equalizer curve
1. Press the
AUDIO
to display the current equalizer curve.
2. Press the
MUTE / SENS
while the name of equalizer curve
blinking to cancel the equalizer curve.
The “EQ OFF” will blinking for few seconds.
Tips
• EQ disp *
Displays the current setting of equalizer curve, if the equal-
izer has been set.
(See “
Setting the equalizer
”)
•
bAS
X-BASS
For enhanced bass centered @ 72 Hz, Blaupunkt’s X-BASS
function can be set for either each band and CD/CD changer/
AUX mode. Reduce X-BASS level if your combination of
speakers and add on amplifires sound distorted at the pre-
ferred sound level.
•
AU
GAIN (AUX gain)
Adjust the input volume of the external equipment.
It is displayed only AUX mode.
•
LMt
LEVEL (Limit volume)
Adjust the volume at the time of power on. You can adjust
with the actual sound.
•
MUt
LEVEL (Mute level)
You can adjust the mute level with the actual sound.
• Settings for BASS, TREBLE, LOUDNESS and X-BASS can be
made to each of the following modes independently:
FM/AM/CD/CD changer/AUX
Setting the sound stage
You can select/adjust the position of sound stage to best serve
a particular seat.
Selecting the sound stage
1. Press the
AUDIO
to select the BAL/FAD adjustment mode.
2. Press the preset button
1
~
6/
to select the desired
sound stage as follows.
•
1
POS 1 (For the left seat) B R2 F R4
•
2
POS 2 (For the front seat) B 0 F R4
•
3
POS 3 (For the right seat) B L2 F R4
•
4/MIX
POS 4 (For the rear seat) B 0 F F4
•
5/RPT
POS 5 (For all the seat) B 0 F 0
•
6/
POS 6 (For all the seat) B 0 F 0
Adjusting the sound stage
1. Press the
AUDIO
to select the BAL/FAD adjustment mode.
2. Adjust the desired sound stage.
3. Press the desired preset button
1
~
6/
for more than
2 seconds to store the desired sound stage.
SacramentoCD33_Eng 2/5/03, 4:27 PM4