Filter
Top Products
10
First use
If the unit is being connected for the first time
or if the power supply to the unit has been
interrupted, the Install menu will appear. The
following settings are made in the Install
menu:
● Selection of an external audio source
instead of a CD changer
● Time setting
● Tuner configuration for US or European
operation
● Reset to factory defaults
● Internal amplifier on/off.
You can reopen the Install menu at any time:
➮ Hold down the MENU button 8 until
the Install menu appears.
Changing settings
Selecting an external audio source
➮ Press the soft key 4 with the display
allocation “AUX” .
If the display reads “AUX”, then the input is
already on.
➮ Press the or button 7 to toggle
“AUX” on or off.
➮ Press the OK button 5.
Note:
If the AUX input is on, it can be selected with
the CDC button =.
Setting the clock
➮ Press the soft key 4 with the display
allocation “CLK”.
➮ Set the hour using the or button
7.
➮ Press the button 7.
➮ Set the minutes using the or button
7.
➮ Press the OK button 5.
Setting the tuner
To ensure proper tuner function in
the US the tuner must be set to “US”.
➮ Press the soft key 4 with the display
allocation “TUNE”.
➮ Select “EUROPE” or “US” using the us-
ing the
or button 7.
➮ Press the OK button 5.
Switching the internal amplifier on/off
➮ Press the soft key 4 with the display
allocation “AMP”.
➮ Select “AMP ON” or “AMP OFF” using
the using the
or button 7.
➮ Press the OK button 5.
Note:
If you set the internal amplifier to “AMP OFF”,
there will be no playback via the loudspeak-
ers connected directly to the unit. In this case,
playback will be solely via an external ampli-
fier.
Reset (factory defaults)
➮ Press the soft key 4 with the display
allocation “NORM”.
The display will read “NORMSET”.
If you really want to reset the device to the
factory presets,
➮ press the OK button 5.
Exiting the Install menu
To exit the install menu,
➮ press the OK button 5. The settings
are now stored.
USING YOUR CAR RADIO FOR THE FIRST TIME