Filter
Top Products
20
Switching between stereo and
mono
In the event of poor reception, you can select
radio playback in mono. After each time the
car radio is switched on, playback is in ste-
reo.
➮ in radio mode, press the TUNE button
>.
The Radio Function menu will appear on the
display.
➮ Press the soft key 4 with the display
allocation “NEXT”.
The “second page” of the Radio Function
menu will appear on the display.
➮ Press the soft key 4 with the display
allocation “MONO”.
The current status “MONO” or “STEREO” will
appear briefly on the display. If “MONO” is
activated, an arrow symbol will appear next
to “MONO”.
➮ Press the TUNE button > or wait eight
seconds. The settings are now stored.
Changing the display
You can change what is shown on the dis-
play. The top line of the display (headline) can
be toggled to show the station name, frequen-
cy, programme type, or time.
➮ Press the DIS button : repeatedly un-
til the desired information (station name,
frequency, programme type, or time)
appears in the headline.
Selecting radio text display
Some stations also use the RDS signal to
broadcast running text, so-called “radio text”.
You can permit or block radio text display.
➮ In radio mode, press the TUNE button
>.
The Radio Function menu will appear on the
display.
➮ Press the soft key 4 with the display
allocation “NEXT”.
The “second page” of the Radio Function
menu will appear on the display.
➮ Press the soft key 4 with the display
allocation “RTXT”.
If the radio text function is active, an arrow
symbol will appear in front of “RTXT”.
➮ Press the TUNE button > or wait for
eight seconds. The settings are now
stored.
Naming a station
You can assign to a stored station your own,
four-character name that will be shown on the
display.
➮ Press the MENU button 8.
➮ Press the soft key 4 with the display
allocation “TUN”.
➮ Press the soft key 4 with the display
allocation “NAME”.
You are now in edit mode. If the selected sta-
tion has not been assigned a name yet, four
underline characters will appear on the dis-
play.
➮ The current input position will blink.
➮ Use the soft key 4 with the display allo-
cation “PREV” or “NEXT” (for the previ-
ous or next stored station in the memory
bank) to select the station that you want
to name.
RADIO MODE