Filter
Top Products
Adjusting the sensitivity of the
station seek tuning (SENS)
You can choose whether the radio should
only tune into stations providing good re-
ception or whether it can also tune into
those with a weak reception.
Press the MENU button >.
The display shows "MENU".
Press the
or button 2 repeatedly
until "SENS" and the currently set value
appears on the display.
"SENS HI6" means that the tuner is set to
the highest sensitivity setting. "SENS LO1"
means it is set to the lowest sensitivity set-
ting.
Press the button
2 to open the sub-
menu.
Set the desired sensitivity level using
the
or button 2.
When you have fi nished making your chang-
es,
press the MENU button >.
To exit the menu,
press the ESC button <.
Note:
You can set different sensitivity levels
for FM and AM (MW/LW).
Storing stations
Storing stations manually
Select the desired memory bank (FM1,
FM2, FMT) or one of the wavebands
(MW or LW).
Tune into the desired station.
u
u
u
u
u
u
u
u
Tuning into a station
There are various ways of tuning into a sta-
tion:
Automatic station seek tuning
Press the
or button 2.
The radio tunes into the next receivable
station.
Tuning into stations manually
You can also tune into stations manually.
Note:
You can only tune into stations manu-
ally if the convenient RDS function and
RDY are deactivated.
Press the
or button 2.
Browsing through broadcasting
networks (FM only)
If radio stations provide several pro-
grammes, you have the option of browsing
through these so-called "broadcasting net-
works".
Note:
The convenient RDS function and PTY
must be activated before you can use
this feature.
Press the
or button 2 to switch
to the next station on the broadcasting
network.
Note:
When using this feature, you will only
be able to switch to stations that you
have received once before already. To
receive the stations, use the Scan or
Travelstore function.
u
u
u
53
ENGLISH
Radio mode
02_Brisb_VictoriaSD48_gb.indd 5302_Brisb_VictoriaSD48_gb.indd 53 23.11.2007 16:13:37 Uhr23.11.2007 16:13:37 Uhr