Filter
Top Products
Display
If you switch on the vehicle illumination,
the display brightness switches day mode
to night mode. This requires that your car
sound system is connected as described in
the installation instructions. Your vehicle
must feature the corresponding connection
option.
Adjusting the display brightness
You can adjust the display brightness sepa-
rately for night (DIM NIGHT) and day (DIM
DAY) in steps ranging from 1 to 16.
Press the MENU button >.
The display shows "MENU".
Press the
or button 2 repeatedly
until "DIM DAY" or "DIM NIGHT" appears
on the display.
Press the
button 2 to call up the
submenu.
"DAY" or "NIGHT" and the currently set value
are displayed.
Press the
or button 2 to adjust
the brightness.
When you have fi nished making your chang-
es,
press the MENU button >.
To exit the menu,
press the ESC button <.
u
u
u
u
u
u
Setting the display illumination
colour
For the display illumination, you can se-
lect a colour from the RGB spectrum (red-
green-blue) or mix using the colours red
and green, select a colour during the col-
our scan or switch on a constant colour
change.
Mixing the color for the display
illumination (DISP COL)
To customise the display illumination to suit
your tastes you can either mix a colour your-
self using the three primary colours red,
green and blue (RGB) or from the colours
red and green (RG).
Press the MENU button >.
The display shows "MENU".
Press the
or button 2 repeat-
edly until "DISP COL" appears on the
display.
Press the
button 2 to open the RGB
menu or the
button 2 to open the
RG menu.
The display shows "4096 COL" for the RGB
menu or "256 COL" for the RG menu.
Press the
button 2 to open the
menu for mixing your own colour.
Either "R", "G", and "B" or "R" and "G" are
displayed with the current values. The set-
ting for "R" is activated. You can adjust a
value from 0 to 16 each for every available
colour component.
u
u
u
u
71
ENGLISH
Display
02_Brisb_VictoriaSD48_gb.indd 7102_Brisb_VictoriaSD48_gb.indd 71 23.11.2007 16:13:42 Uhr23.11.2007 16:13:42 Uhr