Filter
Top Products
10
Adjusting the volume
You can adjust the volume in steps from
0 (off) to 50 (maximum).
➮ To increase the volume, turn the
volume control 2 clockwise.
➮ To decrease the volume, turn the
volume control 2 anticlockwise.
Setting the power-on volume
You can set the default volume level at
which the device plays when it is
switched on.
➮ Press the MENU button 9.
➮ Press the softkey 5 assigned to
the “VOLUME” display item.
➮ Press the softkey 5 assigned to
the “ON VOL” display item.
➮ Set the volume level that you want
using the volume control 2.
➮ Press the joystick OK 8 or the
MENU button 9 to close the
menu.
The settings are saved.
Note:
You can also set the power-on volume
to be the same as the volume level that
was active before you switched off the
device. To do so, press the softkey as-
signed to the “LAST VOL” display item
in the volume menu.
Risk of injury! If the power-on
volume is set to maximum, the vol-
ume level can be very high when the
device is switched on.
If the volume was set to maximum
before the device was switched off
and the power-on volume is set to
“LAST VOL”, the volume level can
be very high when the device is
switched on again.
Severe damage to your hearing can
be caused in both cases!
Volume mute
You can instantaneously reduce the
volume (mute).
➮ Briefly press button 1.
“MUTE” appears in the display.
Cancelling mute
➮ Briefly press button 1 again.
or
➮ turn the volume control 2.
Telephone audio / navigation
audio
If your car sound system is connected
to a mobile telephone and/or a naviga-
tion system, the sound system’s volume
will be muted as soon as you “pick up”
the phone or as soon as a navigation
announcement is made. You will then
hear the caller or navigation announce-
ment over the car sound system’s loud-
speakers. In order for this feature to
work, the mobile telephone and the nav-
igation system must be connected to the
car sound system as described in the
installation instructions.
ADJUSTING THE VOLUME