Filter
Top Products
39
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
➮ Press the softkey 5 assigned to
the “AUX2” display item. By press-
ing the “AUX2” softkey you can
switch between the “AUXILIARY 2
ON” and “AUXILIARY 2 OFF” set-
tings.
Note:
● If a CD changer is connected, you
cannot change the “AUX1” input.
➮ Press the joystick OK 8 or the
MENU button 9 to close the
menu.
The settings are saved.
Note:
● If the AUX inputs are activated, you
can select them by pressing the
SOURCE button <.
Naming the AUX input
You can give each AUX input a name
so you can recognise them more easily
when selecting them using the
SOURCE button < (e.g. you can give
them the device names that they are
connected to).
➮ Press the MENU button 9.
➮ Press the softkey 5 assigned to
the “AUX” display item.
The AUX menu is displayed.
➮ Press the softkey 5 assigned to
the “EDIT” display item under
“AUX1” or “AUX2”.
The default text for the selected input
appears in the display. The text input
marker flashes at the beginning of the
line.
EXTERNAL AUDIO SOURCES
To enter a name,
➮ press the joystick 8 to the left or
right to move the input marker.
➮ Enter the letter that you want by
pressing the joystick 8 up or
down.
➮ Once you have finished entering
the name, press the joystick OK
8 or the MENU button 9 to close
the menu.
The settings are saved.