Filter
Top Products
High Performance LCD Monitors Navigating the Monitor | en 29
Bosch Security Systems, Inc. Installation Manual F.01U.076.723 | 3.0 | 2009.03
5 Navigating the Monitor
5.1 Navigating the Front Panel
Use the front panel to make any necessary OSD adjustments to
the UML-172-90, UML-192-90, or to the UML-202-90. See the
figure below for an explanation of the front panel.
Figure 5.1 Front Panel Buttons
5.2 Navigating the Monitor On-screen Display
(OSD)
The UML172-90, UML-192-90, and the UML-202-90 have two (2)
modes: Video and PC. The LCD is programmed through the on-
screen display (OSD) menus and submenus where an operator
can select operating parameters. To access the OSD menus,
press the Menu button on the front panel or on the remote
Number Button Description
1 Input Button Selects the signal to be displayed
2 Menu Button Selects the on-screen display (OSD)
3 Scrolls up in the OSD
4 Performs an Autoset when
connected to the VGA input, which
automatically adjusts the display to
match the graphics adapter.
Scrolls down in the OSD
5 Decreases the value Scrolls left in the OSD
6 Increases the value Scrolls right in the OSD
7 IR Sensor Remote control sensor
8 LED Indicator Power On (green)
Power Off, Standby (red)
9 Power Button Display Power (On/Off)