Filter
Top Products
46 en | TroubleShooting Guide High Performance LCD Monitors
F.01U.076.723 | 3.0 | 2009.03 Installation Manual Bosch Security Systems, Inc.
Vertical or
horizontal noise
is present in the
picture
– Push the down key to activate the Autoset function
(for VGA inputs only).
-or-
– Adjust the Clock and Phase in the PC OSD submenu.
Incorrect colors – Press the Menu button on the front panel of the
monitor, then press the down arrow to select the
Color Tone menu. Press the down arrow on the front
panel and select Cool, Warm, or Normal.
- or -
– Press the Menu button on the front panel of the
monitor, then press the right arrow to select the
Setup menu. Press the down arrow on the front panel
and select Recall to reset to the default settings.
The error
message “Out of
Range” is
displayed
PC is operating with either a resolution or timing mode
that is not supported by the monitor. Change the PC
timing mode to one of the valid combinations below:
640 x 480; 60/72/75 Hz
800 x 600; 60/72/75 Hz
1024 x 768; 60/70/75 Hz
1280 x 1024; 60 Hz
1600 x 1200; 60 Hz
Problem Solution