Filter
Top Products
33
Service Information
To Replace the V-2 Mid-frequency Driver in the Panaray
®
LT 4402
®
-III,
LT 9402
TM
-III or LT 9702
®
-III Loudspeakers
1. Turn off the amplifier power.
2. Disconnect the loudspeaker input connection(s).
3. The LT 4402-III, LT 9402-III and LT 9702-III use two V2 drivers. Remove the four screws securing each V2 driver to the
cabinet.
CAUTION: Be careful not to let the driver fall out of the cabinet.
4. Disconnect the following:
• For the top V2, disconnect the RED (+) and BLUE (-) wires connected to the driver.
• For the bottom V2, disconnect the BLACK (+) and BLUE (-) wires.
5. Replace the damaged V2 driver.
6. Make the following connections:
• For the top V2, connect the RED (+) and BLUE (-) wires connected to the driver.
• For the bottom V2, connect the BLUE (+) and BLACK (-) wires.
7. Secure each V2 driver to the cabinet with the four screws (on each V2).
8. Reconnect the input connections.
9. Turn on amplifier power.
.