Filter
Top Products
Setting up the System
12 - English
6. When prompted by the app, plug the small end of the USB cable into the
SETUP A connector on the SoundTouch
™
wireless adapter.
SoundTouch
™
wireless
adapter SETUP A connector
7. Plug the larger end of the USB cable into a USB port on your computer.
When the SoundTouch
™
app detects your system, the Wi-Fi
®
status indicator
on the rear panel of the SoundTouch
™
wireless adapter lights solid amber.
The app instructs you to enter your network credentials.
8. When prompted to remove the USB cable, disconnect the USB cable from
the SoundTouch
™
wireless adapter and from the computer.
Note: Leave the wireless adapter connected to the SA-4 amplifier,
and the amplifier connected to AC (mains) power.
9. Follow the instructions on your computer to complete setup, including
creating a SoundTouch
™
account, locating your music library, signing
in to music services, exploring music, and personalizing your presets.
Note: During this process, you will be prompted to install the provided
batteries into the SoundTouch
™
controller.
10. When finished, disconnect the SA-4 amplifier from AC (mains) power and
prepare to connect the speakers.
If the amplifier is not in its permanent location, install the SA-4 amplifier and
the SoundTouch
™
wireless adapter. When you reconnect the system to AC
(mains) power, it reconnects to your network.