Filter
Top Products
E - 8
8. RADIO OPERATIONS
9) RADIO SIGNAL STRENGTH METER (RSLM)
This is use to indicate the signal strength of current radio station broadcast. When you
choose RADIO mode, it will show on the display.
5) LOCAL/DISTANT BUTTON (LO/DX)
During station tuning, this button allows you prior to access strong local station only (Local
mode), or to access a wider range of using distant mode (DX). When power up DX mode
will be selected automatically; Press LOC button briefly to select Local mode and “LOCAL”
symbol on the LCD will light up for a few seconds.
7) STATION PRESET BUTTONS (M1-M6)
1.Press these buttons briefly to recall the stored stations in the selected band.
2.Presetting stations manually, Press the BAND button to select the band for the station to
be preset. Use Tuning Up/Down to tune in the stations to be preset. Press the Preset
button at which you want to store the station for at least 2 second. The preset number will
appear on the display accompanied by a beep, this indicate that the station has been
stored into memory.
8) TUNING / SEEK UP AND TUNING / SEEK DOWN BUTTONS
1.PressthesebuttonsbrieflywilloperateAUTOSEARCHtuningmode,theradiowilltuneupor
downtothenextstationandremainonthefrequency.
2.Pressthesebuttons morethan2 seconds,operate asMANUALSEARCHbuttons, underthis
modethetuningfrequencywilladvanceupordownrapidlywhenthebuttonis pressed.Ifthe
buttonsarenotpressedwithin 3seconds,theywillreturntoautosearchmode.
10) AUTO MEMORY STORE/PRESET SCAN BUTTON (AMS)
1.PRESET SCAN: Press AMS button briefly enter Preset Scan mode, it will scan all the
preset stations in the memories, you can hear that will stay on each station for about 5
seconds.
2.AUTO MEMORY STORE: Press AMS button long to enter Auto Store mode, this feature
will automatically scan the current band and enter up to 6 strongest stations into the 6
preset memories. To stop Auto Store & Scan, press the AMS button again.
Best reception Worst reception
14) BAND BUTTON (BAND)
Press BAND button to change between Fm1, FM2, FM3 & AM/MWbands.
DUAL FREQUENCY SWITCH
Unit is defaulted in U.S.A frequency, if EURO frequency is required, a sharp pen is needed to
switch the button on the left side of the chassis to EURO frequency.
US
EU