Boss Audio Systems BV8963 Car Stereo System User Manual


 
03
BASIC FUNCTION
1. SOURCE Button
Press this button to power on. Press it shortly to switch audio source mode.
At AUX IN mode, press it longer to power off.
6. OPEN Button
Press this button can eject the disc.
4. VOLUME - Button
Press this button shortly volume level one step by one step. Press this button decrease
longer volume level continuously.decrease
5. VOLUME + Button
Press this button shortly volume level one step by one step. Press this button Increase
longer volume level continuously.Increase
2. UP Button
Press this button to make the LCD monitor up.
3. DN Button
Press this button to make the LCD monitor down.
7.AUX IN
External connected audio input.
8. SD Input
Connect the SD memory card to this socket, and the unit can play MP3 music.
10.RELEASE Button
Press this button to release the panel.
11.Remote Control receiver
It is able of receiving infrared signals launched by the remote control matching the unit.
12. Slot indicator light
13. RESET Light
14. RESET Button
Press this button and this unit will
be restored to the initial state.
15. Disc Slot
12
13
14
15
16
INSTRUCTIONS INSTRUCTIONS
80
9 Dual (front and rear)USB
Warning :You can only use either front or rear USB at a time.Never connect both front
and rear USB at the same time! This could cause malfunctions.
This unit is with switchable frequency.
You can switch from USA frequency to Europe frequency by following the
below steps:
Step1. In main menu, press setup icon to enter the setup interface.
Step2. Press the Radio icon,and insert password 123456, then press “OK”,
the menu from which you can select the radio frequency will show.
Step3. Press “Radio region” and select the desired frequency by pressing the "up"
and "down" arrow, then press it and setting is finished.