Filter
Top Products
7
3. Attach four (4 ) pod mounting brackets (item 14 pg
2) to front and rear of bezel with four (4 ) 6-32 X
1/2" screws (item 4 pg 2) and four (4) 8-32 KEPS
nuts (item 1 pg 2). See Figure 10.
4. Install and secure O.E. bezel in overhead
console (item 19 pg 2) with eight ( 8 ) # 6
X 3/8" PPH screws (item 2 pg 2) As
shown. See Figure 11.
Figure 10
Figure 11