Filter
Top Products
30 VRX745VD
English
Owner’s manual
FM reception
For enhanced FM performance the
®
tuner includes signal actuated stereo control,
Enhanced Multi AGC, Impulse noise reduction
curcuits and Multipath noise reduction circuits.
Listening to the radio
1. Press the [FUNC] button and select the
Radio mode. The frequency is displayed.
2. Press the [BAND] button and select the radio
band. Each time the button is pressed, the
radio reception band changes in the
following order:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...
3. Press the [a] or [d] button to tune in the
desired station.
Seek tuning
1. Press the [BAND] button and select the
desired band. (FM or AM)
2. Tune in to a station.
∗ If “MANU” is lit in the display, press and hold
the [BAND] button for 1 second or longer.
“MANU” in the display goes off and seek
tuning is now available.
∗ The same operation is also available by using
the [BAND] key.
3. Press the [a] or [d] button to
automatically seek a station.
When the [d] button is pressed, the station
is sought in the direction of higher
frequencies; when the [a] button is
pressed, the station is sought in the direction
of lower frequencies.
∗ The same operation is also available by using
the [å] or [∂] key.
Selecting stations with the KEY PAD
∗ This function displays the KEY PAD on the screen
enabling you to tune by entering a frequency.
Radio Operations
1. Touch the [SRCH] key to switch the KEY
PAD.
2. Touch the [0]~[9] key corresponding with the
frequency you desired. When you touch the
wrong number ([0]~[9] key), you can cancel
that to touch the [CLR] key.
3. Touch the [ENT] key. The radio station you
required would be tuned.
4. Touch the [ESC] key.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the
frequency changes one step at a time. In quick
tuning mode, you can quickly tune the desired
frequency.
1. Press the [BAND] button and select the
desired band. (FM or AM)
∗ If “MANU” is not lit in the display, press and
hold the [BAND] button for 1 second or longer.
“MANU” appears in the display and manual
tuning is now available.
∗ The same operation is also available by using
the [BAND] key.
2. Tune into a station.
● Quick tuning:
Press and hold the [a] or [d] button for 1
second or longer to tune in a station.
● Step tuning:
Press the [a] or [d] button to manually
tune in a station.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio
stations in memory. Pressing the corresponding
[DIRECT] button recalls the stored radio
frequency automatically.
There are 2 ways available to recall the preset
station.
●Using the [DIRECT] button
1. Press the [BAND] button and select the
desired band. (FM or AM)
2. Press the corresponding [DIRECT] button to
recall the stored station.
∗ Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store that station
into preset memory.