Filter
Top Products
52 VRX745VD
English
Owner’s manual
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for Radio stations, CD,
TV stations and CD changer. The numbers of
titles that can be entered for each mode are as
follows.
∗
You cannot enter titles with the unit in Seek, Preset
Scan, Auto store (TUNER or TV) mode. Cancel
each of those operations before entering titles.
1. Press the [FUNC] button to select the mode
you want to enter a title (TUNER, CD, CD-
changer or TV).
2. Select and play a CD in the CD changer or a
CD track or tune in to a Radio station or a TV
station for which you want to enter the title.
3. Touch the screen (TV mode only).
4. Touch the [LIST] key to display the LIST
screen.
5. Touch the [USER TTL] key.
The title input mode display appears.
6. Touch the characters, symbols, etc. shown in
the display to input titles.
“ ” : Centering
“CLEAR” : Backspace
“ ” : Space
“MEMO” : Memory
“z(w)” : Scroll
Notes:
• Up to 10 characters can be input.
• To switch the character types, touch the scroll key
(z)
at the lower left of the display.
7. Repeat the step 6 to enter the complete title.
8. Touch the [MEMO] key for 2 seconds or
longer to store the title into memory and
cancel title input mode.
Other FunctionsSIRIUS Operation
Mode
TUNER mode
CD mode
TV mode
Number of titles
30 titles
50 titles
15 titles
CD changer mode
CDC655z connected
CDC655Tz connected
CDC1255z connected
DCZ625 connected
Number of titles
60 titles
100 titles
50 titles
100 titles
Presetting a category
A category can be preset by registering specific
categories in [DIRECT] keys 1 to 6. Then the
desired category can be recalled by pressing
the corresponding [DIRECT] keys.
1. Touch the [SUB] key.
2. Touch the [ITEM] key to display a category.
3. Touch the [z] or [w] on the screen to select
the desired category on the screen.
4. Touch the category you wish to store in
memory.
5. Touch the [PRESET] key to open the preset
screen.
6. Touch and hold down for 2 seconds or longer
the Preset No. key you wish to store in
memory.
Notes:
• When the name of a channel stored in memory is
changed by a broadcasting station, the display
may show a channel name that differs from the
stored name.
• A channel stored in memory may be discontinued
at the option of the broadcasting station.
Scan function
There are two scan modes: a category scan
mode and a preset scan mode.
During scanning channels are displayed in
abbreviated form and the display mode cannot
be switched.
●Category scanning
In a category scan, broadcast channels in the
same category as the current channel are
selected about every 10 seconds.
1. Touch the [SUB] key.
2. Touch the [SCAN] key.
Note:
• Category scanning is not available when no
category is defined for the current channel.
● Preset scan
A preset scan scans the channels (up to 18
channels) stored in the preset memory about
every 10 seconds.
1. Touch the [LIST] key.
2. Touch the [PS] key.