Filter
Top Products
30 VRX755VD
English
Owner’s manual
Basic Operations
Front image
(receiver screen)
Rear monitor
image
(separately sold)
Audio output
Image of device
connected to the
Visual terminal
(∗3)
Image of device
connected to the
Visual terminal
Displays image of mode selected
using the [SOURCE] button.
Displays image of mode selected using the [SOURCE] button. (∗2)
Sound from mode selected with [SOURCE] button is output from 4ch speaker,
NON-FADER, and AUDIO-OUT.
Front monitor lock ON
Visual connection
[OTHERS]
Visual connection
[NAVI]
Visual connection
[OTHERS]
Visual connection
[NAVI]
(∗1)
Front monitor lock OFF
Monitor image and sound with 2-ZONE ON/OFF
●With 2-ZONE function OFF
●When 2-ZONE function is ON
Front image
(receiver screen)
Rear monitor
image
(separately sold)
Audio output
Image of device
connected to the
Visual terminal
(∗3)
Image of device
connected to the
Visual terminal
Displays image of mode selected
using the main unit’s [SOURCE]
button
• Sound from mode selected with main unit’s [SOURCE] button is output from
4ch speaker, and AUDIO OUT.
• Sound from mode selected with remote control unit’s [SOURCE] button is
output from NON-FADER.
Front monitor lock ON
Visual connection
[OTHERS]
Visual connection
[NAVI]
Visual connection
[OTHERS]
Visual connection
[NAVI]
(∗1)
Front monitor lock OFF
Displays image from mode (DVD or VISUAL) selected with remote control unit’s
[SOURCE] button.
∗1A device connected to the Visual terminal
should be set up as described in the section
“Switching CONNECT”.
∗2 No image is displayed on the rear monitor
when a non-image mode such as radio,
SIRIUS, CD, etc. is engaged.
∗3 For safety reasons, this image is not
displayed when the vehicle is moving. The
picture can be watched only when the
vehicle is standing still and the parking brake
is engaged.
CAUTION
When 2-ZONE is ON, the NON-FADER
OUTPUT level is fixed at equivalent to VOL27
(high volume).
When an external amplifier or speakers are
attached to the NON-FADER OUTPUT
connectors, do not set the unit to the 2-
ZONE mode, since a high volume of sound
will be suddenly output from the speakers
connected to the NON-FADER OUTPUT,
potentially causing damage to the connected
amplifier or speakers.