Filter
Top Products
English
Owner’s manual
56 VRX755VD
Title list play
You can display a list of titles, then select the
CD track, disc or broadcast station to listen to
from that list.
∗ You can not display a title list with the unit in
Seek, Preset Scan, Auto store (Tuner or TV)
mode. Cancel those operation modes before to
display a title list.
1. Touch the screen (TV mode only).
2. Touch the [LIST] key to display the LIST
screen.
A title list is displayed. The following
functions can be carried out in a title list
display.
●TUNER: A title of a station stored in the
presets 1 to 6 or frequency is displayed;
●CD-changer: DISC titles for discs 1 to 6
are displayed (By changing over a display
page in case of 12-CD changer, disc 7 to
12 can be displayed). When there is not
any disc in a changer, ”NO DISC” is
displayed.
●TV/SIRIUS: A title of a channel stored in
the presets 1 to 6 or a channel number is
displayed.
3. Touch the [DIRECT] key (1 to 6) to select
one of the items 1 to 6 and reproduce the
selected broadcast station or disc.
∗ In case of 12-CD changer, touch the [
zz
zz
z] key
to change over to a list display of discs 7 to
12.
4. Touch the [RTN] key again to return to the
previous mode.
Changing over monitor display size
∗ This function is available only when the panel is
open.
Notes:
• This function is not available while you are
driving.
• Switch to the VISUAL/DVD player(DVD video or
video CD)/DVD changer/TV mode you see.
1. Touch the screen to display the menu, then
touch “display size” key ([F.WIDE], etc.).
Each time you press the [DISP] button, the
monitor display size changes in the following
order:
“F. WIDE” ➜ “CINEMA” ➜ “NORMAL” ➜
“WIDE” ➜ “F. WIDE”
● “F. WIDE”: (full wide mode)
The whole image elongates horizontally.
● “CINEMA”: (cinema mode)
The image at both top and bottom in a
display disappears.
● “NORMAL”: (normal display)
There is a black area at both right and left
ends of a display. In case of normal TV
broadcasting (4:3), the image can be shown
without being cut or deformed.
● “WIDE”: (wide mode)
The image at right and left ends in a display
elongates horizontally.
Notes:
• When a normal 4:3 size image, not being a wide
one, is viewed by displaying it fully on a wide
monitor display in a wide mode or a full-wide
mode, a part of the peripheral image will be
lacking or deformed. In deference to the intention
of producer, an original image can be viewed in a
normal mode.
• During superimposed display, it becomes a full-
wide mode.
• When the monitor display size mode is changed,
only the monitor display size indication
superimposed on the screen (“NORMAL”,
“WIDE”, “F.WIDE” or “CINEMA”) will be changed,
then the corresponding display size mode will be
engaged.
Internal amplifier cancel function
This function is used to disable the internal
amplifier when an external amplifier is
connected.
∗ The factory default setting is “OFF”.
1. Press the [ADJ] button.
2. Touch the [AUDIO EXT.] key.
3. Touch the [AMP CANCEL] key to select
“ON” or “OFF”.
●OFF: Use with the internal amplifier.
●ON: Use with the external amplifier.
4. Touch the [ESC] key to return to the previous
screen.
Triggered audio mute for cellular
telepones
This unit requires special wiring to mute the
audio signal automatically when a cellular
telephone rings in the car.
∗ This function is not compatible with all cellular
telepones. Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.
Other Functions